Miele TWB 120 WP Dryer Manual

The Miele TWB 120 WP is a high-performance heat pump dryer designed to provide efficient and gentle drying for your laundry. It features advanced technology for optimal drying results, energy efficiency, and a variety of drying programs tailored for different fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Heat pump technology, multiple drying programs, energy-efficient operation, user-friendly interface, and a large capacity drum.

Feature	Description
Heat Pump Technology	Uses a closed-loop system to recycle heat for efficient drying.
Multiple Drying Programs	Offers various settings for different fabric types and drying needs.
Energy Efficiency	Designed to consume less energy compared to traditional dryers.
User-Friendly Interface	Intuitive controls for easy operation and program selection.
Large Capacity Drum	Accommodates larger loads for fewer drying cycles.

Installation

Ensure proper ventilation and a stable surface for installation. Follow the manufacturer's guidelines for connecting to power and drainage.

Unpack the dryer and inspect for any damage.
Place the dryer in a well-ventilated area.
Connect to a power source as per the installation manual.
Ensure proper drainage for condensation.

WARNING! Ensure the dryer is level and stable to avoid vibrations during operation.

First-Time Setup

Power on the dryer and follow the on-screen prompts to set your preferences.

Select your preferred language on the display.
Set the drying preferences based on fabric type.
Run a test cycle to ensure proper operation.

CAUTION! Ensure that the dryer is properly connected before first use.

Specifications

Model: Miele TWB 120 WP.
Drying Capacity: 8 kg.
Energy Efficiency Class: A++.
Dimensions: 85 x 59.6 x 63.6 cm.
Weight: 50 kg.
Power Supply: 220-240V, 50Hz.
Noise Level: 65 dB.

Controls and Settings

Access the control panel for program selection, drying time adjustment, and additional settings.

Control Features: Start/Stop button, program selection dial, display screen for settings, and indicator lights for cycle status.

Connecting to Power

Ensure the dryer is connected to a suitable power outlet as per the specifications.

Check the power cord for any damage before connecting.
Plug the dryer into a grounded outlet.
Do not use an extension cord.

Tip: Ensure the outlet is easily accessible for maintenance.

Operating the Dryer

Follow the instructions for selecting the drying program and starting the dryer.

Load the dryer with laundry, ensuring not to overload.
Select the desired drying program.
Press the Start button to begin the drying cycle.
Monitor the display for cycle progress.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Check and clean the condenser unit periodically.
Inspect the power cord and connections regularly.

CAUTION! Unplug the dryer before performing maintenance.

Regulatory Information

This dryer complies with all relevant safety and performance standards. For more information, visit the Miele website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Power supply issue	Check power connection and outlet.
No heat	Blocked filter	Clean the lint filter and check the condenser.
Long drying times	Overloading	Reduce load size and select appropriate program.
Unusual noise	Foreign object	Check drum for any objects and remove.

Reset: Refer to the user manual for reset instructions.

Service: Contact Miele customer support for assistance.