Miele TMG 440 WP Dryer Manual

The Miele TMG 440 WP is a high-performance heat pump dryer designed to provide efficient and gentle drying for your laundry. With advanced technology, it offers various drying programs, energy efficiency, and user-friendly features. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Heat pump technology, multiple drying programs, energy-efficient operation, user-friendly interface, and large capacity drum.

Feature	Description
Heat Pump Technology	Uses a closed-loop system to recycle heat for efficient drying.
Multiple Drying Programs	Offers various settings for different fabric types and drying needs.
Energy Efficiency	Rated A++ for energy efficiency, reducing electricity consumption.
Large Capacity Drum	Can accommodate large loads, making it ideal for families.
User-Friendly Interface	Easy-to-use controls and display for selecting programs.

Installation

Unpack and inspect the dryer. Ensure proper ventilation and drainage.

Position the dryer in a well-ventilated area.
Connect the power supply according to local regulations.
Ensure the drainage hose is properly installed.
Level the dryer using adjustable feet.

WARNING! Ensure all connections are secure to prevent leaks or electrical hazards.

First-Time Setup

Power on the dryer and follow the on-screen prompts to set preferences.

Select language and region settings.
Program the drying preferences based on fabric types.
Test the dryer with a small load to ensure proper operation.

CAUTION! Ensure the dryer is level and stable before use.

Specifications

Model: Miele TMG 440 WP.
Type: Heat Pump Dryer.
Energy Efficiency Rating: A++.
Drum Capacity: 8 kg.
Dimensions: 85 x 59.6 x 63.6 cm.
Power Supply: 220-240V, 50Hz.
Weight: 60 kg.

Controls and Settings

Access the control panel to select drying programs and settings. The display shows the remaining time and program status.

Controls: Start/Stop, Program Selection, Delay Start, and Drying Level adjustments.

Connecting to Power

Ensure the dryer is connected to a suitable power outlet.

Use a dedicated circuit for the dryer.
Check voltage and amperage requirements.
Ensure the power cord is not damaged.

Tip: Always unplug the dryer when performing maintenance.

Operating the Dryer

Follow the instructions to operate the dryer effectively.

Load the dryer with laundry, ensuring not to overload.
Select the desired drying program.
Press Start to begin the drying cycle.
Monitor the display for remaining time and status.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Check and clean the condenser unit periodically.
Inspect the drainage system for blockages.

CAUTION! Always unplug the dryer before performing maintenance.

Regulatory Information

This dryer complies with all relevant safety and performance standards. For more information, visit the Miele website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Power supply issue	Check power connection and circuit breaker.
No heat	Blocked filter	Clean the lint filter and condenser.
Long drying times	Overloading	Reduce load size for optimal drying.
Unusual noises	Foreign objects	Check drum for any items that may cause noise.

Reset: Refer to the user manual for reset instructions.

Service: Contact Miele customer support for assistance.