Miele TDB130WP Eco Dryer Manual

The Miele TDB130WP Eco Dryer is a high-efficiency tumble dryer designed to provide optimal drying results while being energy efficient. It features a range of advanced technologies, including heat pump technology, which allows for lower energy consumption. The dryer is equipped with various drying programs tailored for different fabric types, ensuring gentle care for your laundry. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Dryer 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Heat pump technology, multiple drying programs, user-friendly controls, energy-efficient design.

Feature	Description
Heat Pump Technology	Uses low temperatures for energy-efficient drying
Multiple Drying Programs	Customizable settings for various fabric types
Energy Efficiency	Class A energy rating for reduced power consumption
Large Capacity	Can handle up to 8 kg of laundry
Easy-to-Use Controls	Intuitive interface for selecting programs and settings

Installation

Ensure proper ventilation and a stable surface for installation. Follow the guidelines below:

Unpack the dryer and inspect for any damage.
Position the dryer in a well-ventilated area.
Connect to a power source and ensure the outlet is grounded.
Check for proper drainage if using a condensate option.

WARNING! Ensure the dryer is level to avoid vibrations during operation.

First-Time Setup

Power on the dryer and follow the on-screen prompts to configure settings.

Select your preferred language on the display.
Set the drying preferences according to your laundry needs.
Run a test cycle to ensure proper functionality.

CAUTION! Do not overload the dryer to ensure optimal drying performance.

Specifications

Model: Miele TDB130WP
Capacity: 8 kg
Energy Efficiency: Class A
Power Supply: 220-240V, 50Hz
Dimensions: 85 x 59.6 x 63.6 cm
Weight: 50 kg
Noise Level: 65 dB
Drying Programs: 12 different settings

Controls and Settings

Access the control panel to select drying programs and adjust settings. The display provides clear information on the selected program and remaining time.

Buttons: Start/Pause, Program Selection, Temperature Control, Delay Start.

Additional settings include anti-crease and refresh options for garments.

Connecting Devices

Ensure proper connections for optimal performance.

Connect the dryer to a power source.
For ventless operation, ensure the condensate drain is properly connected.
Follow the manufacturer's guidelines for any additional accessories.

Tip: Always refer to the installation manual for specific connection instructions.

Operating the Dryer

To operate the dryer, follow these steps:

Load laundry into the drum and close the door securely.
Select the desired drying program using the control panel.
Press the Start button to begin the drying cycle.
Monitor the progress on the display.

WARNING! Do not open the door during operation to avoid injury.

Accessibility Features

The Miele TDB130WP Eco Dryer includes features to assist users with disabilities, including tactile controls and audible signals for program completion.

Care & Cleaning

Regular maintenance is essential for optimal performance. Clean the lint filter after each use and periodically check the condenser unit.

CAUTION! Unplug the dryer before performing any maintenance.

Regulatory Information

This dryer complies with all relevant safety and performance standards. For more information, visit the Miele website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	No power supply	Check power connection and outlet.
Clothes not drying	Overloading	Reduce load size and select appropriate program.
Unusual noise during operation	Foreign object in drum	Stop the dryer and check for objects.
Dryer stops mid-cycle	Overheating	Allow to cool down and check lint filter.

Reset: Refer to the user manual for reset instructions if necessary.

Service: For assistance, contact Miele customer support.