Miele T 4462 C Dryer Manual

The Miele T 4462 C is a high-efficiency tumble dryer designed to provide optimal drying results while being gentle on your clothes. This dryer features advanced technology, including a heat pump system, multiple drying programs, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Heat pump technology, multiple drying programs, energy-efficient operation, and user-friendly controls.

Feature	Description
Heat Pump Technology	Uses low temperatures for gentle drying while saving energy.
Multiple Drying Programs	Customizable settings for various fabric types and drying needs.
Energy Efficiency	Designed to consume less energy compared to traditional dryers.
Easy-to-Use Controls	User-friendly interface for selecting programs and settings.
Large Capacity	Accommodates large loads for efficient drying.

Installation

Ensure proper ventilation and a stable surface for installation. Follow the manufacturer's guidelines for connecting to power and drainage.

Position the dryer in a well-ventilated area.
Connect the power supply according to the specifications.
Ensure the drainage system is properly installed.
Level the dryer for optimal operation.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer and follow the on-screen prompts to configure settings.

Select preferred language on the display.
Set the drying preferences according to fabric types.
Run a test cycle to ensure proper functionality.

CAUTION! Ensure the dryer is properly installed before use.

Specifications

Model: Miele T 4462 C.
Type: Heat Pump Tumble Dryer.
Energy Efficiency Class: A++.
Capacity: 8 kg.
Dimensions: 85 cm x 59.5 cm x 63.6 cm.
Power Supply: 220-240V, 50Hz.
Weight: 50 kg.
Noise Level: 65 dB.

Controls and Settings

Access the control panel to select drying programs, adjust settings, and monitor the drying process.

Control Features: Start/Stop button, program selection dial, display panel for settings and time remaining.

Connecting Power

Ensure the dryer is connected to a suitable power outlet with the correct voltage.

Turn off the power supply before connecting.
Use the provided power cord to connect to the outlet.
Ensure the outlet is grounded.

Tip: Consult an electrician if unsure about electrical connections.

Operating the Dryer

Follow the instructions to select drying programs and start the dryer.

Load the dryer with wet laundry.
Select the desired drying program using the control dial.
Press the Start button to begin the drying cycle.
Monitor the drying process on the display panel.

WARNING! Do not overload the dryer to ensure optimal performance.

Maintenance and Care

Regular maintenance is essential for optimal performance and longevity of the dryer.

Clean the lint filter after each use.
Check and clean the heat exchanger periodically.
Inspect the power cord and connections for wear.

CAUTION! Always unplug the dryer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	No power supply	Check power connection and outlet.
No heat	Blocked filter	Clean the lint filter and check for blockages.
Long drying times	Overloading	Reduce load size for optimal drying.
Unusual noise	Foreign object	Check drum for any foreign objects.
Display error	System malfunction	Reset the dryer and consult the manual.

Service: For assistance, contact Miele customer service at 1-800-999-1360 or visit www.miele.com.