Miele PDR 918 SOM Dryer Manual

The Miele PDR 918 SOM is a high-performance commercial dryer designed for efficiency and reliability. It features advanced drying technology, a large capacity drum, and user-friendly controls. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, advanced drying technology, user-friendly control panel, energy-efficient operation.

Feature	Description
Large Capacity Drum	Accommodates large loads for efficient drying
Advanced Drying Technology	Ensures optimal drying performance
User-Friendly Controls	Intuitive interface for easy operation
Energy Efficiency	Designed to minimize energy consumption
Safety Features	Includes overheat protection and child lock

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Choose a suitable location with adequate ventilation.
Connect to the appropriate power supply.
Ensure all connections are secure and leak-free.
Level the dryer for stable operation.

WARNING! Improper installation may lead to safety hazards. Consult a professional if needed.

First-Time Setup

Power on the dryer and follow the on-screen prompts for initial setup.

Select preferred language on the control panel.
Set drying preferences based on fabric type.
Run a test cycle to ensure proper operation.

CAUTION! Ensure all settings are correct before starting the dryer.

Specifications

Model: Miele PDR 918 SOM
Drying Capacity: 18 kg
Power Supply: 400V, 3-phase
Dimensions: 850 mm x 600 mm x 600 mm
Weight: 100 kg
Energy Efficiency: A++ rating
Operating Temperature: Standard room temperature

Controls and Settings

Access the control panel for various settings including drying time, temperature, and fabric type.

Control Features: Start/Stop button, drying cycle selection, time adjustment, and display indicators.

Connecting Power

Ensure the dryer is connected to a suitable power source before operation.

Verify voltage and phase requirements.
Use appropriate wiring and circuit breakers.
Consult an electrician if unsure about connections.

Tip: Always disconnect power before performing maintenance.

Operating the Dryer

Follow these steps to operate the dryer effectively.

Load the dryer with wet laundry.
Select the desired drying program.
Press the Start button to begin the drying cycle.
Monitor the display for cycle progress.

WARNING! Do not overload the dryer to prevent damage.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Inspect and clean the venting system periodically.
Schedule professional servicing annually.

CAUTION! Always unplug the dryer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	No power supply	Check power connection and circuit breaker.
Poor drying performance	Clogged lint filter	Clean the lint filter and check venting.
Unusual noise	Foreign object in drum	Inspect drum for foreign objects.
Overheating	Blocked vent	Check and clear any blockages in the vent.

Reset: Refer to the control panel for reset options if available.

Service: Contact Miele customer service for assistance.