Miele PDR 914 SOM Dryer Manual

The Miele PDR 914 SOM is a high-performance commercial dryer designed for efficiency and durability. It features advanced drying technology, a large capacity drum, and user-friendly controls. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, advanced moisture sensing, user-friendly control panel, energy-efficient operation, and multiple drying programs.

Feature	Description
Moisture Sensing	Automatically adjusts drying time based on moisture levels
Large Capacity Drum	Accommodates large loads for commercial use
User-Friendly Controls	Intuitive interface for easy operation
Energy Efficiency	Designed to minimize energy consumption
Multiple Drying Programs	Various settings for different fabric types

Installation

Ensure proper ventilation and a stable surface for installation. Follow the guidelines for connecting to power and water supply.

Position the dryer in a well-ventilated area.
Connect the dryer to the power supply as per the specifications.
Ensure all connections are secure and leak-free.

WARNING! Improper installation can lead to hazards. Consult a professional if unsure.

First-Time Setup

Power on the dryer and follow the on-screen prompts to configure settings.

Select preferred language on the control panel.
Set up drying programs according to fabric types.
Run a test cycle to ensure proper operation.

CAUTION! Ensure the dryer is level for optimal performance.

Specifications

Model: Miele PDR 914 SOM.
Capacity: 14 kg (30.8 lbs).
Power Supply: 400V, 3-phase, 50Hz.
Dimensions: 850 mm x 600 mm x 800 mm (H x W x D).
Weight: 100 kg (220 lbs).
Energy Efficiency: Class A rating.
Operating Temperature: Standard room temperature.

Controls and Settings

Access the control panel for program selection, drying time adjustments, and additional settings.

Control Features: Start/Stop button, program selection dial, display screen for settings.

Connecting Power

Ensure the dryer is connected to a suitable power source.

Check voltage requirements before connecting.
Use the appropriate power cord and plug.
Ensure the circuit breaker is rated for the dryer’s power consumption.

Tip: Always consult a qualified electrician for installation.

Operating the Dryer

Follow the instructions for loading, selecting programs, and starting the drying cycle.

Load the dryer evenly to prevent imbalance.
Select the desired drying program.
Press the Start button to begin the drying cycle.

WARNING! Do not overload the dryer to ensure efficient drying.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Inspect and clean the venting system regularly.
Schedule professional servicing annually.

CAUTION! Unplug the dryer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power connection and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Long drying times	Blocked vent	Clean venting system and lint filter.
Unusual noise	Loose parts	Inspect for loose components and tighten as needed.

Service: For assistance, contact Miele customer support.