Miele PDR 908 HP -EL Dryer Manual

The Miele PDR 908 HP -EL is a high-performance dryer designed for commercial use, featuring advanced technology for efficient drying. It offers various drying programs, a large capacity drum, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, advanced drying technology, user-friendly controls, energy-efficient operation.

Feature	Description
Large Capacity Drum	Accommodates large loads for efficient drying
Advanced Drying Programs	Multiple settings for different fabric types
Energy Efficiency	Designed to minimize energy consumption
User-Friendly Controls	Intuitive interface for easy operation
Safety Features	Overheat protection and child lock

Installation

Ensure proper ventilation and electrical connections. Follow the installation guide for optimal setup.

Position the dryer in a well-ventilated area.
Connect to the power supply according to local codes.
Ensure the exhaust duct is properly installed.
Level the dryer for stable operation.

WARNING! Ensure all connections are secure to prevent hazards.

First-Time Setup

Power on the dryer and follow the on-screen prompts to configure settings.

Select preferred language on the display.
Set drying preferences based on fabric types.
Run a test cycle to ensure proper operation.

CAUTION! Ensure the dryer is properly installed before use.

Specifications

Model: Miele PDR 908 HP -EL.
Drying Capacity: Up to 10 kg.
Power Supply: 230V, 50Hz.
Energy Efficiency: Class A++.
Dimensions: 850 mm x 600 mm x 600 mm.
Weight: 70 kg.
Noise Level: 62 dB.

Controls and Settings

Access the control panel for program selection and settings adjustment.

Control Features: Start/Stop button, program selector, display panel for cycle information.

Connecting Power

Ensure the dryer is connected to a suitable power source.

Check voltage requirements before connecting.
Use a dedicated circuit for optimal performance.
Ensure proper grounding of the appliance.

Tip: Consult a qualified electrician if unsure about connections.

Operating the Dryer

Follow the instructions for loading and selecting drying programs.

Load the dryer with wet laundry.
Select the appropriate drying program.
Press the Start button to begin the drying cycle.
Monitor the cycle on the display panel.

WARNING! Do not overload the dryer to ensure efficient operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

CAUTION! Unplug the dryer before performing maintenance.

Regulatory Information

This appliance complies with all relevant safety standards and regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Power supply issue	Check power connection and circuit breaker.
No heat	Heating element failure	Inspect and replace heating element if necessary.
Long drying times	Blocked vent	Check and clean the venting system.
Unusual noises	Foreign objects	Inspect drum for foreign objects and remove.

Service: For assistance, contact Miele customer service.